Paramedic Series AED Automated external defibrillator – CU-ER1

FEATURES:

• Automatic analysis of patient ECG.
• User guide with text and voice prompts.
• 320 X 240 graphic LCD display.
• Versatile Power Supply, rechargeable battery pack and AC adapter standard.
• Car cigar lighter jack power cord and disposable battery pack optional.
• Battery has capacity of 200 shocks when fully charged.
• Rescue data collected is stored in internal flash memory.
• Rescue data can be downloaded for review, archiving and printing.

Automatic self tests, prompts and alarms given if device fails self tests.

ECG Function

– Patient connection: Defibrillation Pads, ECG Electrodes.
– Bandwidth: Monitoring Mode: 0.3 to 40Hz (-3dB)

EMS Mode

– 1~30Hz
– ECG size: 5,10, 20mm/mV display on monitor ( Auto scaling)
– Heart rate: Digital 30 to 300 bpm (±2%)
Defibrillator – Operation mode: Semi automatic
– Waveform: e-cube biphasic (Truncated exponential type)
– Energy: 150J into 50ƒ?? load (default setting)
Preprogrammed selection (150J-150J-180J,150J-180J-180J)
– Charging time: Less than 10 seconds
– Recognition: Sensitivity and Specificity = 99.5%
– Detection Level: > 0.1mV ECG
– Defibrillation Electrodes: Multifunction electrodes (Disposable)
Adult adhesive pads (pre-gelled)
Voice and Text Prompts – Voice and text prompts guide the user through the protocol
– All the user interfaces are supported in local language for easy use.
Data Storage & Management – Internal flash memory: 10 hours of event and ECG recording
– SmartMedia Card (32M): 48 hours of event and ECG recording or 1 hour if voice recording is enabled.
Automated Self-Test – Power On Self-Test / Run Time Self-Test / Manual Test
– Periodic Self-Tests (daily / weekly / monthly)
Display – Screen Type: High resolution display (graphic LCD)
– Screen size: 4 inches diagonal, 320×240 pixels
– Sweep speed: 25mm/sec, nominal
– Viewing time: 3.2 seconds
Physical – Size: 305mm x 250mm x 95mm (L x W x H)
– Weight: Approximately 2.8Kg
– Galvanic Protection: BF type
AC Adaptor – Input: 100 ~ 240V AC 50/60Hz 1.2A – Output: + 12VDC, 3.5A
Battery Pack – 12V Nickel-Metal Hydride battery pack (rechargeable)
– Charging time: Minimum of 4 hours for full charging
– Capacity: when new, minimum of 200 shocks deliveries (fully charged)
External Link – UART port – IrDA port
Package Contents – Device, 1 Sets of pads, 1 Power Cord, 1 AC Adapter, 1 Long Life NI-MH battery, 1 Operator’s Manual, 1 Quick Reference Card, Carrying Case
Optional Accessories – Car Cigar Lighter Jack Power Cord
– SmartMedia Card (32M)
– External Thermal Printer (wire) and paper
– UART Cable / ECG Cable (3 lead) / ECG Electrodes.